Description

KING 10″ PIGGYBACK COILOVERS OUT OF STOCK FOR THIS KIT – ESTIMATED 4-5 MONTH LEAD TIME FROM ORDER DATE FOR LSK TO SUPPLY SHOCKS

LSK Is Proud To Introduce The 2007-2018 GM 1500 2wd Bolt On Kit. Our Bolt On Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Complete Heimed Steering From Rack Out, Fabricated Coil Bucket Adapters & Weld On Cam Lockouts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As An Occasional Off Road Rig Or One That Sees Majority Street Use. 

 

PERFORMANCE SPECS

• Wheel Travel – Averages 17” Of Useable Wheel Travel ( Depending On Limit Strap / Bump Stop / Shock Configuration)
• Wheel Base: Extended 1.25″ Forward 
• Track Width: Extended 4.5″ On Each Side
• Recommended Tire Size: 37″
• Recommended Wheel: 17 x 9″ w/4.5″ Backspacing (0mm Offset)

 

INCLUDES

• Upper Arms 
• Lower Arms
• Spindles
  
• Heimed Tierods w/ Clevis Adapters
• Fabricated Coilover Adapters
• Cam Lockout Plates
• Grade 8 Hardware

 

REQUIRES

• 10″ 2.5″ Piggyback Coilovers  – These Are NOT Included In The Kit Above
• Welding Is NOT Required – This Is A Bolt On System, However If You Wish To Add Bypasses, Bypass Hoops Must Be Welded Onto The Coilover Adapter And Frame For Installation
• Extended Brake Lines (Minimum 33″ Line End To End)
• Possible Extension Of Factory ABS Sensor Line (Depends On Wire Routing)
• Limit Straps – Recommend 8″ Limit Strap With Adjustable Clevis Kit (Can be Purchased In The Builders Components Section of Our Store)

OPTIONAL UPGRADES

• Extended Brake Lines – Stainless Steel Braided Brake Lines With Black Covers Specifically Engineered For This Application
• Bypass Hoops – Our Pre-coped Bypass Hoops Orient Off Of The Coilbucket Adapter And Weld To A Lower Portion Of The Frame -Shock Tabs Come Uninstalled To Aid Installers Of Positioning The Bypasses For Clearancing – Includes All Hardware 
• Powdercoat Finish – Black Powdercoat Or Raw Finish (Note: Raw Kits Ship Unassembled)

 

 

IMPORTANT NOTES

• WHILE WEBSTORE MAY DISPLAY AN IN STOCK STATUS, WEBSTORE DOES NOT TRACK KIT INVENTORY IN REAL TIME – PLEASE CONTACT OUR SALES TEAM FOR CURRENT LEAD TIME ON KIT COMPONENTS
• Coilovers And Bypasses Are Custom Ordered And Not Always Stocked Per Application. Please Email Our Sales Team For Current Lead Time On Shock Packages
• Powdercoat Finish – Black Powdercoat Or Raw Finish (Note: Raw Kits Ship Unassembled)
• Upper Control Arm: Use 7/8″-14 Rod Ends – Replacement Rod Ends Can Be Purchased Through Our Online Store Under Builders Components 
  
• Spindles: Use A 1.00″ FK Uniball (PN: WSSX16T) And Replacements Can Be Purchased Through Our Online Store Under Builders Components 
• Lower Control Arms: Use A 1.50″ FK Uniball (PN: COMH24T) & LSK 1.75″ Delrin Bushings. Replacements Can Be Purchased Through Our Online Store Under Builders Components 
• Permanent Frame Modification – Cam Lockout Plates Are Welded Into The Factory Cam Tab Location
• If You Or Your Installer Have Any Questions Please Reach Out To Our Sales Team At (909)-305-4824 Or Email Info@LSKSuspension.com