LSK Is Proud To Introduce The 98-12 Ranger XLT (A-Arm Model Variants) 2wd Builders Kit. Our Builders Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, And Extended Heimed Tie Rods To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As A Dedicated Off Road Rig Or One That Sees Occasional Street Use.
PERFORMANCE SPECS
- Wheel Travel - Averages 17" Of Useable Wheel Travel (Depending On Limit Strap / Bump Stop / Shock Configuration)
- Wheel Base: Extended 1.25" Forward
- Track Width: Extended 4.5" On Each Side
- Recommended Tire Size: 35"
- Recommended Wheel: 17 x 9" w/4.5" Backspacing (0mm Offset)
INCLUDES
- Upper Arms
- Lower Arms
- Spindles
- Tierods
- Grade 8 Hardware
REQUIRES
-
Welding Is Required - This Is Not A Bolt On System And Will Require Proficient Knowledge In Fabrication To Perform The Installation.
-
Custom Shock Mounts - There Is No Upper Shock Mounting Provided With This Builders Kit And Will Have To Be Custom Fabricated By Installer. Lower Control Arms Come With The Shock Tabs Un-welded To Aid In Shock Placement
- 6 Bolt Snouts w/ LSK Or Other Race Hubs
- Customer Supplied Caliper & Rotors (Loose Caliper Tabs Included Work With Wilwood Superlite Calipers)
- Extended Brake Lines (Minimum 31" Line End To End)
- 10" or 12" 2.5" Coilovers
- 10" or 12" 3.0" Bypasses
- Custom Shock Hoops
- Bumpstops - Can Be Configured To Bump Off Of Lower Control Arm, Upper Control Arm Or Spindle Uniball Cup - Typically Recommend a King 2.0" x 2" Stroke With King Fabricated Cans (Can be Purchased In The Builders Components Section of Our Store)
- Limit Straps - Recommend 10" Limit Strap With Adjustable Clevis Kit (Can be Purchased In The Builders Components Section of Our Store)
Requirements
- Wilwood superlite calipers and rotors or equivalent
IMPORTANT NOTES
- WHILE WEBSTORE MAY DISPLAY AN IN STOCK STATUS, WEBSTORE DOES NOT TRACK KIT INVENTORY IN REAL TIME - PLEASE CONTACT OUR SALES TEAM FOR CURRENT LEAD TIME ON KIT COMPONENTS
- Coilovers And Bypasses Are Custom Ordered And Not Always Stocked Per Application. Please Email Our Sales Team For Current Lead Time On Shock Packages
-
Upper Control Arm Use 7/8"-14 Rod Ends - Replacement Rod Ends Can Be Purchased Through Our Online Store Under Builders Components
-
Spindles Use A 1.00" FK Uniball (PN: WSSX16T) - Replacements Can Be Purchased Through Our Online Store Under Builders Components
- Lower Control Arms Use A 1.50" FK Uniball (PN: COMH24T) & LSK 1.75" Delrin Bushings. Replacements Can Be Purchased Through Our Online Store Under Builders Components
- Permanent Frame Modification - New Upper Control Arm Mounts Are Welded In Place Of Removed Factory Upper Control Arm Mounts
- If You Or Your Installer Have Any Questions Please Reach Out To Our Sales Team At (909)-305-4824 Or Email Info@LSKSuspension.com
You can add custom content for all products or you can add dynamic content.
