07-18 Silverado/Sierra 1500 2wd Race Kit

$9,220.00
By LSK

LSK Is Proud To Introduce The 2007-2018 GM 1500 2wd Race Kit. Our Race Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Extended Heimed Tie Rod w/ Machined Steering Clevis And Plate Shock Tower w/ Integrated UCA Mounts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As A Dedicated Off Road Rig Or One That Sees Occasional Street Use. 

 

PERFORMANCE SPECS

  • Wheel Travel - Averages 17" Of Useable Wheel Travel (Ranges 16" - 18" Depending On Limit Strap / Bump Stop / Shock Configuration)
  • Wheel Base: Extended 1.25" Forward 
  • Track Width: Extended 4.5" On Each Side
  • Recommended Tire Size: 37"
  • Recommended Wheel: 17 x 9" w/4.5" Backspacing (0mm Offset)

 

INCLUDES

  • Upper Arms 
  • Lower Arms
  • Spindles
  • Tierods w/ Machined Steering Clevis
  • Shock Towers w/ Integrated UCA Mounts
  • Grade 8 Hardware

 

REQUIRES

  • Welding Is Required - This Is Not A Bolt On System And Will Require Proficient Knowledge In Fabrication To Perform The Installation 
  • Extended Brake Lines (Minimum 33" Line End To End)
  • 10" 2.5" Coilovers
  • 10" 3.0" Bypasses 
  • Shock Hoop (Either LSK Pre-Bent Available Below Or Custom Tie In To Shock Tower)
  • Possible Extension Of Factory ABS Sensor Line (Depends On Wire Routing)
  • Bumpstops - Can Be Configured To Bump Off Of Lower Control Arm, Upper Control Arm Or Spindle Uniball Cup - Typically Recommend a King 2.0" x 2" Stroke With King Fabricated Cans
  • Limit Straps - Recommend 10" Limit Strap With Adjustable Clevis Kit (Can be Purchased In The Builders Components Section of Our Store)


OPTIONAL UPGRADES

  • Extended Brake Lines - Stainless Steel Braided Brake Lines With Black Covers Specifically Engineered For This Application
  • Shock Hoops - Our Pre-bent Shock Hoops Orient Off Of The Tabs On Our Fabricated Shock Tower - Includes Frame Standoffs And Plastic Plugs
  • 2.5" x 10" King Coilovers  - Standard King Blue Finish (contact Our Sales Team For Custom Color Options)
  • 3.0" x 10" King 3-Tube Bypasses  - Standard King Blue Finish (Contact Our Sales Team For Custom Color Options)
  • Bumpstops - 2.0" x 2" Stroke Bumpstops w/ King Fabricated Cans
  • Powdercoat Finish - Textured Black Or "LSK Grey" Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw)

 

IMPORTANT NOTES

  • WHILE WEBSTORE MAY DISPLAY AN IN STOCK STATUS, WEBSTORE DOES NOT TRACK KIT INVENTORY IN REAL TIME - PLEASE CONTACT OUR SALES TEAM FOR CURRENT LEAD TIME ON KIT COMPONENTS
  • Coilovers And Bypasses Are Custom Ordered And Not Always Stocked Per Application. Please Email Our Sales Team For Current Lead Time On Shock Packages
  • Must Select Vehicle Year Range Due To Differences In Steering Clevis Rack Adapters
  • Powdercoat Finish - Textured Black Or "LSK Grey" Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw) - Please List Color Choice In Comments Section Of Your Order, Raw Finish Is Available But May Have An Additional Lead Time
  • Upper Control Arm: Use 7/8"-14 Rod Ends - Replacement Rod Ends Can Be Purchased Through Our Online Store Under Builders Components 
  • Spindles: Use A 1.00" FK Uniball (PN: WSSX16T) And Replacements Can Be Purchased Through Our Online Store Under Builders Components 
  • Lower Control Arms: Use A 1.50" FK Uniball (PN: COMH24T) & LSK 1.75" Delrin Bushings. Replacements Can Be Purchased Through Our Online Store Under Builders Components 
  • Permanent Frame Modification - Shock Tower Is Installed In Place Of Factory Shock & Upper Control Arm Mounts
  • If You Or Your Installer Have Any Questions Please Reach Out To Our Sales Team At (909)-305-4824 Or Email Info@LSKSuspension.com