11-19 Silverado/Sierra 2500HD Coilover Conversion / Torsion Bar Eliminator Kit

$4,350.00
By LSK Suspension
Minus Plus

***NOTE: CURRENTLY OUT OF STOCK - DUE TO CURRENT KING LEAD TIME THESE KITS ARE ESTIMATED TO SHIP 12/30/21*** 

 

LSK Is Proud To Introduce The 11-19 2500HD Coilover Conversion / Torsion Bar Delete System. Our Coilover Conversion Utilizes A Set Of Custom Upper & Lower Arms In Conjunction With A Fabricated Shock Tower/Hoop Setup To Ditch The Factory Torsion Bars To Vastly Improve The On & Off Road Ride. The Factory Shock/Forward Upper Control Arm Mounts And Upper Bumpstop Mounts Are Removed.

INCLUDES

  • Upper Arms
  • Lower Arms
  • Shock Tower/ Hoop Welded Assembly
  • Shock Reservoir Clamps
  • Grade 8 Hardware
  • Frame Cover Plates
  • Limit Straps

REQUIRES

  • Welding Is Required - This Is Not A Bolt On System And Will Require Proficient Knowledge In Fabrication To Perform The Installation 

OPTIONAL UPGRADES

  • Compression Adjusters - Adds The Compression Adjuster Knob Option For The King Coilovers To Allow Quick Adjustments To The Coilovers Without Disassembly
  • Powdercoat Finish - Textured Black Or "LSK Grey" Finishes On The Upper & Lower Control Arms
  • Limit Strap Clevis - Replaces The Upper Weld On Limit Strap Tab And Adds An Adjustable Celvis Setup To Help Compensate With Strap Stretch Over Time (Recommended). 

IMPORTANT NOTES

  • Fits 2011-2019 Silverado/Sierra 2500HD 2wd & 4wd Vehicles
  • Track Width: Stock Track Width
  • Wheel Travel: 9" On Average (Depends On Limit Strap Positioning & Adjustment)
  • Upper Outer Pivot: MOOG Problem Solver HD Balljoint
  • LSK EXCLUSIVE "STAGE 1" UPGRADE: 3/4" FK Uniballs on Inner Pivots With Sealed Uniball Cups - No Squeaky Polyurethane Bushings To Grease And Uniballs Are Protected From The Elements For Extended Life
  • Lower Outer Pivot: MOOG Problem Solver HD Balljoint
  • Lower Inner Pivots: Delrin LCA Bushings for Strength & Noise Reduction With Zinc Coated Pivot Sleeves
  • This Kit Eliminates The Torsion Bar Setup Completely, It Is Not Used In Tandem
  • This Kit Uses A 8" 2.5" King Coilover With Specific Internal Options To Be Run Correctly - If You Wish To Supply Your Own Coilovers Please Contact Our Sales Team To Make Sure They Are Configured Correctly For This Kit
  • Custom Colors Are Available For The Coilovers, Please Contact Our Sales Team For More Information Regarding These Options
  • If You Or Your Installer Have Any Questions Please Reach Out To Our Sales Team At (909)-305-4824 Or Email Info@LSKSuspension.com