07+ Tundra Cantilever Kit

$8,000.00

Introducing The 07+ Tundra Cantilever Rear Suspension Kit. This Kit Is Designed As A VERY Fabricator Friendly Package And Should Be Installed By A Reputable Fab Shop Or An Individual With Proficient Fabrication Skills.

INCLUDES

  • Cantilever Tube Cradle Structure
  • Cantilever Arm Assemblies
  • Axle Tabs
  • Shock Tabs
  • Long Travel Shackles
  • Spring Under Perches 
  • Spring Plates
  • Extended Brake Lines
  • Grade 8 Hardware Throughout

ADD ONS

  • I96 or I96HD Deaver Spring Pack - Purpose Built Spring Packs From Deaver Springs Inc. (For Individuals Towing Or Carrying Loads Over 400lbs We Recommend The I96HD Pack)
  • Bumpstop Mounts - These Bumpstop Mounts Are Designed Around 2.0 x 2" Stroke King Bumpstops And Have Both A Frame Mount With Integrated Bumpstop Cans And An Axle Mounted Strike Pad. Includes 2.0 x 2" King Bumpstops
  • 12" Stroke 3.0" Bypasses - King 3.0 x 12" Bypasses (Bypasses Require A Specific Fitting Layout - If Using Your Own Bypasses Please Contact Our Sales Team To Make Sure The Configuration You Have Will Work With This Kit)

REQUIRES

  • Welding - Many Components In This System Must Be Welded To instaIl
  • 12" Stroke Bypasses Or Smoothie Shocks
  • Possible Extension Of Factory ABS Lines

IMPORTANT NOTES

  • WHILE WEBSTORE MAY DISPLAY AN IN STOCK STATUS, WEBSTORE DOES NOT TRACK KIT INVENTORY IN REAL TIME - PLEASE CONTACT OUR SALES TEAM FOR CURRENT LEAD TIME ON KIT COMPONENTS
  • 15-16" Of Strapped Travel Is Recommended (Limit Straps Are Available In Our Builders Components Section of The Website)
  • Driveshaft Modifications MIGHT Be Necessary When Running This Package Depending On Desired Pinion Angle (We Did Not Have To Modify Driveshaft On In House Builds)
  • TOWING: Towing A Light Trailer Can Be Done, But Excess Body Roll With The Softer Spring Packs May Hinder Towing Control And May Be Done At Your Own Risk
  • Factory Axle: The Factory Axle Can Be Retained For This Kit And Has Been Used As The Basis For The Included Mounts - Custom Housings May Require Modification To The Supplied Mounts 
  • All Components Ship RAW Unless Noted - Contact Our Sales Team for Coating Options For Cantilever Arms, Cradle, And Cantilever Links.
  • Bypasses Are Custom Ordered And Not Always Stocked Per Application. Please Email Our Sales Team For Current Lead Time On Shock Packages
  • Cantilever Links: Use 7/8"-14 Rod Ends - Replacement Rod Ends Can Be Purchased Through Our Online Store Under Builders Components 
  • If You Or Your Installer Have Any Questions Please Reach Out To Our Sales Team At (909)-305-4824 Or Email Info@LSKSuspension.com