07-18 GM 1500 2wd Bolt On Kit

$9,090.00

LSK Is Proud To Introduce The 2007-2018 GM 1500 2wd Bolt On Kit. Our Bolt On Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Complete Heimed Steering From Rack Out, Fabricated Coil Bucket Adapters & Weld On Cam Lockouts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As An Occasional Off Road Rig Or One That Sees Majority Street Use. 

 

PERFORMANCE SPECS

  • Wheel Travel - Averages 17" Of Useable Wheel Travel ( Depending On Limit Strap / Bump Stop / Shock Configuration)
  • Wheel Base: Extended 1.25" Forward 
  • Track Width: Extended 4.5" On Each Side
  • Recommended Tire Size: 37"
  • Recommended Wheel: 17 x 9" w/4.5" Backspacing (0mm Offset)

 

INCLUDES

  • Upper Arms 
  • Lower Arms
  • Spindles
  • Heimed Tierods w/ Clevis Adapters
  • Fabricated Coilover Adapters
  • Cam Lockout Plates
  • Grade 8 Hardware

 

REQUIRES

  • Welding Is NOT Required - This Is A Bolt On System, However The Bypass Hoops Must Be Welded Onto The Coilover Adapter And Frame For Installation
  • Extended Brake Lines (Minimum 33" Line End To End)
  • 10" 2.5" Piggyback Coilovers
  • Possible Extension Of Factory ABS Sensor Line (Depends On Wire Routing)
  • Limit Straps - Recommend 10" Limit Strap With Adjustable Clevis Kit (Can be Purchased In The Builders Components Section of Our Store)


    OPTIONAL UPGRADES

    • Extended Brake Lines - Stainless Steel Braided Brake Lines With Black Covers Specifically Engineered For This Application
    • Bypass Hoops - Our Pre-bent Bypass Hoops Orient Off Of The Coilbucket Adapter And Weld To A Lower Portion Of The Frame -Shock Tabs Come Uninstalled To Aid Installers Of Positioning The Bypasses For Clearancing - Includes All Hardware And Plastic Plugs
    • 2.5" x 10" King Piggyback Coilovers  - Standard King Blue Finish (contact Our Sales Team For Custom Color Options)
    • 3.0" x 10" King 3-Tube Bypasses  - Standard King Blue Finish (Contact Our Sales Team For Custom Color Options)
    • Bumpstops - 2.0" x 2" Stroke Bumpstops w/ King Fabricated Cans
    • Powdercoat Finish - Textured Black Or "LSK Grey" Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw

     

     

    IMPORTANT NOTES

    • WHILE WEBSTORE MAY DISPLAY AN IN STOCK STATUS, WEBSTORE DOES NOT TRACK KIT INVENTORY IN REAL TIME - PLEASE CONTACT OUR SALES TEAM FOR CURRENT LEAD TIME ON KIT COMPONENTS
    • Coilovers And Bypasses Are Custom Ordered And Not Always Stocked Per Application. Please Email Our Sales Team For Current Lead Time On Shock Packages
    • Powdercoat Finish - Textured Black Or "LSK Grey" Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw) - Please List Color Choice In Comments Section Of Your Order, Raw Finish Is Available But May Have An Additional Lead Time
    • Upper Control Arm: Use 7/8"-14 Rod Ends - Replacement Rod Ends Can Be Purchased Through Our Online Store Under Builders Components 
    • Spindles: Use A 1.00" FK Uniball (PN: WSSX16T) And Replacements Can Be Purchased Through Our Online Store Under Builders Components 
    • Lower Control Arms: Use A 1.50" FK Uniball (PN: COMH24T) & LSK 1.75" Delrin Bushings. Replacements Can Be Purchased Through Our Online Store Under Builders Components 
    • Permanent Frame Modification - Cam Lockout Plates Are Welded Into The Factory Cam Tab Location
    • If You Or Your Installer Have Any Questions Please Reach Out To Our Sales Team At (909)-305-4824 Or Email Info@LSKSuspension.com