07+ Tundra Bolt-on Kit / LSK1105

  • Fits 2007+ Tundra 2wd & 4wd Vehicles
  • Wheel Travel: 14.5"
  • Wheel Base: Extended 1.25" forward
  • Track Width: Extended 4.50" each side
  • Lower Uniball pivot: 1.5"
  • Upper Uniball pivot: 1.0"
  • Fits with Factory hubs or LSK Tundra Race hub kit* (Coming Soon!)
  • Coilovers mount to factory shock mounts with adapters


  • Includes

    • Spindles
    • Lower Arms
    • Upper Arms
    • Coilover mounts
    • Complete steering from rack out
    • Grade 8 hardware throughout
  • Requires

    • Extended brake lines
    • Possible extension of factory wheel sensor line
    • Coilovers (Not Included in kit)
    • Extended Axle Shafts for 4WD Models 
  • Important Notes

    • No Welding is required - this is a true bolt on system. Welding and  proficient knowledge in fabrication will be required to perform the installation of the shock hoop if you wish to run bypasses as well
    • This particular kit uses a 8" 2.5" coilover and can be configured to run an 8" 3.0" or 2.5" 3-Tube bypass, a larger bypass can be run but would require a custom tube layout
    • Coilovers require a specific fitting layout - if using your own coilovers please contact our sales team to make sure the configuration you have will work with this kit
    • Shock hoop is  listed as an option because most installers wish to add an engine cage but may want to run their own layout - choose this option if you would like to use our supplied shock hoop by itself to run the optional bypasses, or as a base for your installer to build an engine cage off of. Optional Shock Hoops are contructed out of 1 1/2" .120 wall DOM tubing
    • Kits are normally in stock, however, a lead time of 3-4 weeks for a finished batch is typical on this kit when sold out. Please contact our sales team to verify if product is in stock (While it displays "In Stock" on the website, inventory levels are constantly changing and is not updated in real time)
    • Coilover/Bypass lead time depends soley on King Shock Technologies. Typical lead time can be anywhere from 8-10 weeks on standard King blue finishes.
    • Extended axle shafts are configured to use OEM inner and outer CV joints - RCV HD joints can be added for an additional cost, please contact our sales team to have this option added to your order
    • Custom colors are available for your coilovers and bypasses, please contact our sales team to go over pricing for each additional option.
    • If you have a question, PLEASE reach out and contact us at (909)-305-4824 or email our sales team at lsksuspension@gmail.com
Add Coilovers
Add Bypasses
Add Extended Brake Lines
Add Shock Hoops
Add Extended Axle Shafts

Monday - Friday 9am - 4pm*

*Our shop is open by appointment only at this time.


14589 Rancho Vista Dr

Fontana, Ca 92335


Phone: 909-305-4824 x 104


LSK Logo - Grey Gradiant With Black Outl