89-98 GM C1500 2WD Builders Kit

$6,500.00
By LSK

LSK Is Proud To Introduce The 89-98 GM C1500 2wd Builders Kit. Our Builders Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Extended Heimed Tie Rods  And Double Shear Upper Control Arm Mounts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As A Dedicated Off Road Rig Or One That Sees Occasional Street Use. 

 

PERFORMANCE SPECS

  • Wheel Travel - Averages 17" Of Useable Wheel Travel (Depending On Limit Strap / Bump Stop / Shock Configuration)
  • Wheel Base: Extended 1.25" Forward 
  • Track Width: Extended 4.5" On Each Side
  • Recommended Tire Size: 37"
  • Recommended Wheel: 17 x 9" w/4.5" Backspacing (0mm Offset)

 

INCLUDES

  • Upper Arms 
  • Lower Arms
  • Spindles
  • Tierods
  • UCA Mounts
  • Grade 8 Hardware

 

REQUIRES

  • Welding Is Required - This Is Not A Bolt On System And Will Require Proficient Knowledge In Fabrication To Perform The Installation.
  • Custom Shock Mounts - There Is No Upper Shock Mounting Provided With This Builders Kit And Will Have To Be Custom Fabricated By Installer. Lower Control Arms Come With The Shock Tabs Un-welded To Aid In Shock Placement
  • 12 Bolt Snouts w/ LSK Or Other Race Hubs
  • Customer Supplied Caliper & Rotors (Loose Caliper Tabs Included Work With Wilwood Superlite Calipers) 
  • Extended Brake Lines (Minimum 31" Line End To End)
  • 10" 2.5" Coilovers (NOT INCLUDED IN KIT ABOVE)
  • 10" 3.0" Bypasses (NOT INCLUDED IN KIT ABOVE)
  • Custom Shock Hoops
  • Bumpstops - Can Be Configured To Bump Off Of Lower Control Arm, Upper Control Arm Or Spindle Uniball Cup - Typically Recommend a King 2.0" x 2" Stroke With King Fabricated Cans (Can be Purchased In The Builders Components Section of Our Store)
  • Limit Straps - Recommend 10" Limit Strap With Adjustable Clevis Kit (Can be Purchased In The Builders Components Section of Our Store)


    OPTIONAL UPGRADES

    • 12 Bolt Snouts & LSK 2.5" Race Hubs w/ 6 on 5.5" or 5 on 5.5" Bolt Pattern
    • 2.5" x 10" King Coilovers  - Standard King Blue Finish (contact Our Sales Team For Custom Color Options)
    • 3.0" x 10" King 3-Tube Bypasses  - Standard King Blue Finish (Contact Our Sales Team For Custom Color Options)
    • Brake Package With Wilwood Superlite Calipers & Rotors

     

    IMPORTANT NOTES

    • WHILE WEBSTORE MAY DISPLAY AN IN STOCK STATUS, WEBSTORE DOES NOT TRACK KIT INVENTORY IN REAL TIME - PLEASE CONTACT OUR SALES TEAM FOR CURRENT LEAD TIME ON KIT COMPONENTS
    • Coilovers And Bypasses Are Custom Ordered And Not Always Stocked Per Application. Please Email Our Sales Team For Current Lead Time On Shock Packages
    • Upper Control Arm Use 7/8"-14 Rod Ends - Replacement Rod Ends Can Be Purchased Through Our Online Store Under Builders Components 
    • Spindles Use A 1.00" FK Uniball (PN: WSSX16T) - Replacements Can Be Purchased Through Our Online Store Under Builders Components 
    • Lower Control Arms Use A 1.50" FK Uniball (PN: COMH24T) & LSK 1.75" Delrin Bushings. Replacements Can Be Purchased Through Our Online Store Under Builders Components 
    • Permanent Frame Modification - New Upper Control Arm Mounts Are Welded In Place Of Removed Factory Upper Control Arm Mounts
    • If You Or Your Installer Have Any Questions Please Reach Out To Our Sales Team At (909)-305-4824 Or Email Info@LSKSuspension.com